Here are the photos you were trying to move over to this thread. Maybe a mod can just change the author of this post to
@GBBUDD and delete this sentence.
This photo is the 24 inch culvert pipe. i used 24 inch because the price was right i took a chain saw to the inner ribs and opened a 6" slot about 2" wide and placed them at 4 and 8 o:clock down the horizontal pipe.
Like most I ordered washed river rock, it was disappointing. The only way to wash rock is on a screen in very very thin layers. i DUMPED TONS of water at the pilr in thr trailer though it looks like it did a lot it only scratched the surface.
I used 4000 lb mafia blocks to make the two outside walls.
The mafia blocks were very rough as they make these from left over or rejected concrete by the driver of the trucks they are not by any means concrete finishers they are often barely even close to square and as in my case had mountain dew and snicker leftovers showing in the concrete. i used mortar or concrete to infill the gaps and instead of grinding the sides smooth i just used a 1/8" roofing protection fiberglass and bitumen board on the outside of the wrap and then placed fabric over that. This was the only place i used woven fabric.
I should add that i DUG OUT THE CENTER OF THE BOG AND PITCHED IT TOWARD THE SNORKEL AND PILED SOILS ALONG THE SIDES TO CREATE AND ROUNDED BOTTOM SO DEBRIS WOULD END UP IN THE CENTIPEDE SNORKEL. WHICH WAS ALSO 24 INCH .LL i PILED 3 TO 4 AND LARGER ROCK ALL AROUND THE CULVERT PIPE . UP TO THE TOP OF THE PIPE WHERE AQUABLOCKS WERE THEN PLACED .
i ALSO PLACED THE INFEED PIPE FACING TOWARD THE WALL OF THE BOG SO THAT WAY THE FLOW WAS REDUCED AND NOT PUSHING THE WATER AROUND IN THE CULVERT AS WE WANT THAT AS STILL AS POSSIBLE
aQUABLOCKS WERE BURRIED IN 2 TO 3" ROCK FOR ABOUT 4 INCHES AND THE A FOOT OF 3/4" RIVER ROCK WAS PLACED ON TOP OF THAT I DID NOT USE 3/8" PEA STONE EXCLUSIVELY IT WAS 70% RIVER TO 30% PEA i also added a 2x12 raised edge all around the bog with the exception of the weir area. I took a 2x4 and screwed it to the top and bottom making similar to a i beam . screwed that to the mafia blocks and the upper 2x4 was to keep the 2x12 straight and has 4 years down the road.
After all that i desided to make a small gravel bog in case i ever needed to work on the main bog so i would have the needed bio filter to keep things running. talk about easy in comparison.oNE LAST NOTE WOULD BE TO LEAVE A MINIMUM OF 6 INCHES ON THE SIDES OF THE BOG FROM WATER LEVEL TO THE TOP OF CONTAINMENT IF NOT MORE ..