Skippy filter output water

[Pond Barb]

I have a 100 gal stock tank set up and am trying to figure what to use to make the output into the pond. I want a flat surface so water will cascade off into pond ? I see pics on here , but no one says what they are using.

 

[Lisak1]

Can you link to a post with a picture that you like? That might help!

 

[j.w]

@Pond Barb I have never had one of those ponds sorry.

 

[Tula]

@koiguy1969 makes and sells waterfall weirs......at least he used to

 

[j.w]

@koiguy1969 has these kind and I think he will custom make them for ya:

 

[Pond Barb]

@koiguy1969 makes and sells waterfall weirs......at least he used to

 

[Pond Barb]

Thank you. I have found them. Learn something new everyday. Thanks.

 

[mgmine]

What I use is a piece of 2" pvc about 24" long (2 inch because that's what my piping is) I capped off one end and glued my flex piping to the other. I drilled a few 1" holes along one side of the pipe and then put 1" pvc pipes in the holes and secured them with silicone. The pipes are about 6" long. I laid the pipe on a flat rock and another flat rock on top of it to hide it.

 

[Higdonii]

I took a cement mixing tray from Home Depot and cut the front and back out and attached it with rivers and put brackets with a support board underneath ,the waterfall itself is great but right now I have a couple of leaks so I’m trying to figure out what’s beat to seal it. I originally used 100% silicone caulk but that’s been on there since last fall with no water in the tub so could be why it’s leaking