Pond Liner Calculator

[froger09]

Hi All,

I need some help calculating the size of pond liner I need. My pond is going to be (as soon as I finish digging) 12'x16', roughly kidney shape. The deepest part is going to be 3'.

I have included my design here for you all to see and give your advice and suggestions. The brown level is the ground, the black box is where the skimmer and pump will go and the big triangle thing is where I am planning to put the waterfall/biofall/biofilter.

Level one is going to be 12"deep . Level 2 is 24". and level 3 is 36" (3'). All the shelves are going to be about 12" wide.

Now I have found tons of liner calculator online. But all assume just one level (by asking the maximum depth). None of them allow me to enter any other shelf/level numbers to see what kind of liner size I need. And I am afraid that if I order a liner based on these calculations I'll get a liner that is going to end up short when it goes on the shelves. One solution is that I can just add a couple of feet to the calculation and hope for best. But this just feel like wasting money. So if anybody knows how to calculate liner size with the my requirements here and help me out, i'll really appreciate that.

My design:

 

[koiguy1969]

sounds like a 20 x 25 to me..
16'+3'+3'= 22+1' extra both ends=24' 12' +3'+3'=18'+1'extra both ends=20'
thats assuming that your measurements are correct or over!!

 

[Oldhead]

20x25 is what i used for my 17x12 kidney. deepest part is 3ft.

 

[froger09]

Thanks guys. Really appreciate it.

20x25 is what i used for my 17x12 kidney. deepest part is 3ft.

So you pond have multiple levels too...

 

[Oldhead]

yup, the far end in the picture is 3ft then up to 2 ft and then a 1 ft section. Did that mostly for the plants. I left the deep section with no shelves so the fish have a safe spot that predators can't get to them.

 

[froger09]

Nice. Well looking at your dig, I am going to make some adjustments in my design too. Did you do all the digging by hand? That must have taken alot of time and elbow grease. How far along is the pond?

 

[DrDave]

I like the design.

 

[froger09]

I like the design.

Who's? lol......

Actually DrDave, i have a question for you. I have been trying to find the biofilter design you did. but i can't seem to find the plans/pics etc you posted. Can yo please point me in the right direction...

 

[gardenplanters]

Hi,
Level one is going to be 12"deep . Level 2 is 24". and level 3 is 36" (3'). All the shelves are going to be about 12" wide.

Now I have found tons of liner calculator online. But all assume just one level (by asking the maximum depth). None of them allow me to enter any other shelf/level numbers to see what kind of liner size I need. And I am afraid that if I order a liner based on these calculations I'll get a liner that is going to end up short when it goes on the shelves.

 

[DrDave]

Who's? lol......

Actually DrDave, i have a question for you. I have been trying to find the biofilter design you did. but i can't seem to find the plans/pics etc you posted. Can yo please point me in the right direction...

Please send me a PM to remind me. I'm off to work now, will see what I can do when I get home.

 

[DrDave]

Who's? lol......

Actually DrDave, i have a question for you. I have been trying to find the biofilter design you did. but i can't seem to find the plans/pics etc you posted. Can yo please point me in the right direction...

Here you go. This should help. Somethings new here and I'm not sure if these are working.

 

[gardenplanters]

Hi,
Thanks guys. Really appreciate it.