New pond

[Snowy2011]

Hi guys
Want to build a pond 13 long by 8ft wide and 4ft deep
What size liner do I need also how many litters will it hold
Thank you

 

[dieselplower]

21x16 will leave you zero slack so go a bit bigger.
13x8x4x7.5 is 3120 gallons.

 

[sissy]

all the pond liner places have a calculator and remember your waterfall area or you may need to buy a piece for that .I also put liner under and around my stock tank filter this way if it leaks it leaks right back into the pond ,I bought my liner from dr foster and smith as most charge a fortune to ship those heavy liners .I had to rebuild my pond because something chewed through the liner

 

[j.w]

Snowy

 

[Snowy2011]

Ok c

all the pond liner places have a calculator and remember your waterfall area or you may need to buy a piece for that .I also put liner under and around my stock tank filter this way if it leaks it leaks right back into the pond ,I bought my liner from dr foster and smith as most charge a fortune to ship those heavy liners .I had to rebuild my pond because something chewed through the liner

Ok could you tell me the size of a 3000 liter kit what size would it be as a rectangle ?

 

[sissy]

mine was 20x 25 liner .My pond is 8 ft wide by 20 ft long by 4 ft deep (I forget will have to measure it again ) and is mostly 4 ft deep .I still have the liner receipt from pet mountain .I bought extra length and with because I was not sure how big I was going to go and figured it was safer that way since I was rebuilding my pond .I his shale so just could not get it any bigger .To hard to hand dig .When I unrolled my liner and measure it they actually sent me a little bigger than i ordered .You can see my pond build in showcase if you wish .I could actually raise my pond up another foot or 2 on all sides if I wanted too .I actually had to add a piece of liner for the water fall filter tank