Reply to thread

Message: [QUOTE="crsublette, post: 182242, member: 3847"] Picture below is how a 5 gallon bucket could be made into a suction side pre-filter. A vacuum would be created in the bucket that allows the water to still be pulled in from the drain or inlet. A more sturdy material might need to be used so that the bag does not come up and clog the outlet. To get a better seal on the gamma seal lid, then you can try putting strips of weather stripping below the gasket and put some silicone or vaseline on the gasket O-ring to help it seal better. [/QUOTE]