How do you have your filter?

Joined
Oct 17, 2010
Messages
82
Reaction score
0
Location
Texas
I bought a bucket at Lowes to put my filter in. A few days into it, and the bucket cracked. I took it out and put the pump on bricks. Two high until I figure out what to do.

Have had filter mishaps before. What should I do with my in pond pump. Get another, better bucket or leave it up on bricks?
 

addy1

water gardener / gold fish and shubunkins
Moderator
Joined
Jun 23, 2010
Messages
44,938
Reaction score
29,955
Location
Frederick, Maryland
Showcase(s):
1
Hardiness Zone
6b
Country
United States
lifeworthliving said:
I bought a bucket at Lowes to put my filter in. A few days into it, and the bucket cracked. I took it out and put the pump on bricks. Two high until I figure out what to do.

Have had filter mishaps before. What should I do with my in pond pump. Get another, better bucket or leave it up on bricks?

I am not sure of your set up, will have to reread your posts, your filter was in the bucket? or the pump that has a small filter on it? Some leave them up off the bottom in case of a mishap, some water will be left for the fish. Some have also put in a cut off switch, if the water drops to xx level the pump cuts off.
 
Joined
Oct 17, 2010
Messages
82
Reaction score
0
Location
Texas
I will have to look into the cut off switch. I have always had mine on bricks. But that kinda goes back to the rock in the pond thing! So I got a bucket, put the pump in it, wrapped filter material around the top. Worked very well for a few days. Pulled the bucket out to check on the filer material and the bucket was split open on one side. ggrr.

My filter is a big one. Mag drive, something. Will get a better bucket if that sounds like it will work. My bad for cheaping out.
 

koiguy1969

GIGGETY-GIGGETY!!
Joined
Dec 15, 2008
Messages
10,587
Reaction score
6,409
Location
Michigan zone 5b
i would consider using a dollar store mini milk crate...they are about 6" - 8" high and wont block circulation. just zip tie the pump to the bottom of the crate.
 
Joined
Aug 9, 2010
Messages
152
Reaction score
3
Location
North-Eastcoaster with shovels for blizzards
lifeworthliving said:
I bought a bucket at Lowes to put my filter in. A few days into it, and the bucket cracked. I took it out and put the pump on bricks. Two high until I figure out what to do.

Have had filter mishaps before. What should I do with my in pond pump. Get another, better bucket or leave it up on bricks?

addy1 said:
I am not sure of your set up, will have to reread your posts, your filter was in the bucket? or the pump that has a small filter on it? Some leave them up off the bottom in case of a mishap, some water will be left for the fish. Some have also put in a cut off switch, if the water drops to xx level the pump cuts off.

lifeworthliving said:
I will have to look into the cut off switch. I have always had mine on bricks. But that kinda goes back to the rock in the pond thing! So I got a bucket, put the pump in it, wrapped filter material around the top. Worked very well for a few days. Pulled the bucket out to check on the filer material and the bucket was split open on one side. ggrr.

My filter is a big one. Mag drive, something. Will get a better bucket if that sounds like it will work. My bad for cheaping out.

koiguy1969 said:
i would consider using a dollar store mini milk crate...they are about 6" - 8" high and wont block circulation. just zip tie the pump to the bottom of the crate.

Hmm... I consider myself lucky. I found a free baby-tub in my city's recycle center, and used it for a "cut-off-pumping-purpose-when-water's-down-to-12-inches". I used 2 black bricks to hold the tub down so the tub will not float and flip over when 2-feet-of-water are all leaked or pumped out accidentally (see the round tub in the photo below.) My fishies :rolleyes: are "insured" by the 12-inch-tall-baby-tub :lol:!

dsc02596o.jpg

 

stroppy

stroppy
Joined
Apr 22, 2009
Messages
1,663
Reaction score
11
Location
Southend on Sea Essex England
the thing is if you put things round your filter how do you get the rubbish out of your pond ...i thought that was the whole idea the pump its meant to work like a bottom drain isnt it ?
 
Joined
Oct 17, 2010
Messages
82
Reaction score
0
Location
Texas
stroppy said:
the thing is if you put things round your filter how do you get the rubbish out of your pond ...i thought that was the whole idea the pump its meant to work like a bottom drain isnt it ?

I always thought so. But having it on the bottom allows for all the water to get out. Putting it up on bricks will keep at least a foot of water in there. If the fish don't knock the pump off the bricks. A bucket will only allow for the pond to get so low. :lol:

I put filter material around and over the pump in the bucket. But, what happend is when I took the bucket out to check the filter material, all the uck went back in the pond.

I'm confused as to what will be the best all the way around.
 

addy1

water gardener / gold fish and shubunkins
Moderator
Joined
Jun 23, 2010
Messages
44,938
Reaction score
29,955
Location
Frederick, Maryland
Showcase(s):
1
Hardiness Zone
6b
Country
United States
I do exterior pumps, so can't say much about the submersibles. We have a very low flow one running while we are setting things up, it will be gone next spring when we finish getting the exterior one going.
 
Joined
Oct 17, 2010
Messages
82
Reaction score
0
Location
Texas
koiguy1969 said:
i would consider using a dollar store mini milk crate...they are about 6" - 8" high and wont block circulation. just zip tie the pump to the bottom of the crate.

That makes sense. Did not think of that. Thank you. I have one in my garage. Will do that tomorrow. That is a perfect solution.
 
Joined
Aug 9, 2010
Messages
152
Reaction score
3
Location
North-Eastcoaster with shovels for blizzards
stroppy said:
the thing is if you put things round your filter how do you get the rubbish out of your pond ...i thought that was the whole idea the pump its meant to work like a bottom drain isnt it ?

Stroppy, good questions. Here're my answers. Just like the catch phrase "different strokes for different folks," I have a different demand on my pump. I use it, first of all & utmostly, to power my 4-nozzle-fountain (see photos below).

DSC01507.jpg

DSC01505.jpg



About the bottom drainer... it comes in many different forms. hmm... I use a "vacuum" as a drainer to suck up the junks out of my pond every few weeks or so.



DSC01509.jpg

Here's my hero... the super pump and vaccum machine all in one ... so far so good :confused:
 

addy1

water gardener / gold fish and shubunkins
Moderator
Joined
Jun 23, 2010
Messages
44,938
Reaction score
29,955
Location
Frederick, Maryland
Showcase(s):
1
Hardiness Zone
6b
Country
United States
Looks like a good place to take a great shower! except it might be cold.........
 

DrCase

Moderator
Moderator
Joined
Dec 29, 2007
Messages
4,400
Reaction score
789
Location
Arkansas
Hardiness Zone
7a
My pumps are on ropes and i tie them at the height i want them for the season
 
Joined
Aug 9, 2010
Messages
152
Reaction score
3
Location
North-Eastcoaster with shovels for blizzards
stroppy said:
well that is certainly a different type of fountain johnnie ...:0)
That's what I call... an upside down 4-nozzle-fountain :lol:.
DrDave said:
Now that is aeration
Right on Doc :cool:. Hmmm... an aeration without a bubbler :)
addy1 said:
Looks like a good place to take a great shower! except it might be cold.........
The 4 nozzles are not for showers :biggrin: They provide the water-power :surfing: to push the Merry-Round-and-Round-Ride for the lotuses... Watch the video below, and you'll understand what I mean :)

[ame]
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Members online

No members online now.

Forum statistics

Threads
31,539
Messages
518,604
Members
13,771
Latest member
KristaBurd

Latest Threads

Top