does any one know where to get gang valves for an air pumps? i need 5/8 inlet, and 6 outlets, cant seem to find any place that sells them that have 5/8 inlet.
gang valves
- Thread starter bsr8129
- Start date
Nada?
The gang valves that they sell aren't meant for ponds.
Just make your own using PVC and ball valves.
Just make your own using PVC and ball valves.
Any details on making own? Not sure I have seen anything that will hook into a 5/8 hose
buy a short piece of hose to fit the pump buy two stainless steel clamps to fit the hose.
buy 1 Barb Insert x 1/2" Male Adapter
Buy several 1/2" PVC tee with the side port threaded to fit adapter
and the ends will be slip x slip tees and a short piece of pipe.
put the hose on the pump and tighten down the clamps.
screw the barb into the tee put the hose on and tighten clamp.
you can get everything at at Lowe's.
you will need 1/2' ball valves with one end threaded this will be where you hose to the pond goes,
it will look something like this.
buy 1 Barb Insert x 1/2" Male Adapter
Buy several 1/2" PVC tee with the side port threaded to fit adapter
and the ends will be slip x slip tees and a short piece of pipe.
put the hose on the pump and tighten down the clamps.
screw the barb into the tee put the hose on and tighten clamp.
you can get everything at at Lowe's.
you will need 1/2' ball valves with one end threaded this will be where you hose to the pond goes,
it will look something like this.
Attachments
i want to try to make this but i think i need a little more info or pictures. 